United Static Control Products, Inc

This quart sample of ElectraClean is a gentle yet effective cleaner specifically formulated for use on any type of ESD (static control) flooring or electrically conductive floor coating. ElectraClean works GREAT on ESD epoxy, vinyl, esd waxes and paints. This product works great in both power scrub AND mop on applications, removing dirt and soil while maintaining or increasing the conductivity of your critical esd flooring substrate. For more infomration about ElectraClean click here!

• Application: ESD Floor Surfaces should be swept or vacuumed prior to washing to remove loose dirt and soil. For use in daily or frequent damp mopping, use a dilute solution of 8-10 ounces of ElectraClean per gallon of warm water. Mop the floor lightly and allow it to dry. Do not rinse. For heavier soil conditions, sweep or vacuum the floor to remove loose soil or dirt. Dilute 12 - 16 ounces of cleaner per gallon of warm water and use as a mopping solution. After cleaning, the floor may be spray buffed with ElectraShine or recoated with ElectraGlaze. NEVER use plain water or regular all purpose cleaners for maintaining conductive finishes!
• MSDS SHEET
• PRODUCT SPECIFICATIONS
• COVERAGE:1,000 SF per gallon of diluted ElectraClean.Typical dilution at 8 ounces to a gallon of water =  16,000 SF oc leaning power in each non diluted gallon of ElectraClean!
• SPECIAL PRECAUTIONS: Can cause eye and skin irritation. Wear safety glasses and plastic gloves when handling material. Prolonged contact with skin can cause dermatitis. If ingested, drink milk, egg whites, gelatin solution, or large volumes of water. Do not induce vomiting. In the event of eye or skin contact flush the effected area with plenty of water. Contact physician immediately. Contains Diethylene glycol methyl ether CAS# 111-777-3. For detailed information consult MSDS sheet.