 |
 |
 |
|
This quart sample of ElectraSheen Saphire II is the hardest, most wear resistant floor finish in the industry! ElectraSheen is Anti Static and will reduces nuisance static discharge! Perfect for Hospitals, Retail, Supermarkets and More. In addition this product has a unique ability to reduce tribocharging (user induced static discharge caused by contact and separation of a person's shoes or the wheels of carts against the flooring).
APPROXIMATE COVERAGE: 1,500 SF Per Gallon Per Coat APPLICATION: Best results are obtained when the finish is applied to surfaces that are 60o F or warmer. Remove old finish or wax with a high quality finish stripper. Mop up or vacuum the stripping solution and rinse the floor thoroughly with clean water. Optimum appearance and gloss is obtained with five coats of finish. Apply thin even coats, allowing the finish to dry for approximately 30-45 minutes, depending on humidity and temperature, between coats. Recoating existing finish: Wash the floor with a neutral cleaner and allow it to dry. Apply thin even coats, allowing the finish to dry for approximately 30-45 minutes. Routine maintenance program: Floor surfaces should be swept with a clean daily to remove abrasive loose dirt and sand. Damp mop floors with neutral cleaner daily to remove soil, salt, and film deposits that can degrade a coating's gloss. Floors may be high speed burnished to restore the gloss and extend the time between.
|
|
|
 |
|
 |
|
