Why spray buff and esd floor finish? Spray buffing changes the profile as well as the hardness of the existing esd floor finish and provides a brilliant diamond like luster as the alteration of the micro finish operation progresses. Not only is the wax made harder by the heat generated as a by product of the polishing / burnishing application. (equating to an approximate 20% increase in wear resistance) electrical conductivity is increased by as much as 1/2 of a decade in both point to point readings and resistance reading to ground. Although the heat generated during the polishing process can be beneficial it's important not to get carried away. Overheating can pull excessive active ingredients from the finish compromising conductivity and leaving hard to remove oily smears. We recommend using new polishing pads or bonnets, starting with the finest pad available and working to a more aggressive pad should your needs dictate. Always keep the pad semi moist. The flooring should never feel warm to the touch in an area that has been polished. For best results allow the floor finish to cure for at least 24 hours prior to polishing. ElectraShine provides a superb increase in shine, conductivity and wear resistance and works well with both propane and electric high speed polishers to remove many common scuff marks as you polish.
