Toggle mobile menu
Free Shipping on Select Matting!
Current Consumption: 3.20 to 1.60 Amp
Operating Temperature: 32o F. - 122o F. (0 ~50°c)
Air Coverage: 24" x 24" (60cm x 60cm)
Air Volume: 70~120 CFM
Size (including stand): 18.1" (L) x 11.2" (W) x 6.1" (H)"
Weight: 19 Lbs (8.6kg)
Electrical Requirements: The SL-028 requires 110VAC /60Hz (standard) or 220VAC / 50Hz (optional) power. These units must be grounded. The instrument is equipped with a 3 prong grounded US male plug (standard). Do not modify the plug or use an ungrounded 3 prong receptacle. If an extension cord is required use heavy gauge fully grounded cords only.
Operating Procedure: Activate the SL-028 benchtop ionizing blower by turning fan speed knob clockwise. The ionization indicator will illuminate and indicate the presence of ionized air. Airflow speed can easily be adjusted utilizing the fan speed knob. The time required to neutralize electrostatic potential is dependant on distance of ionizer to work surface and speed of fan. When used in electronic assembly the ionized air stream should cover as much of the working area as possible. The constant flow of ionized air prevents items from developing an electrostatic potential.
Routine Maintenance Overview: Clean emitter as needed. To clean ion emitter point press and turn point cleaner knob (located in middle of air outlet) clockwise approximately one turn and release. Clean air inlet and outlets as needed with a soft brush or vacuum. Periodically test ion output as indicated by your internal esd program or ANSI/ESD S 20.20-2007, TR53, Air Ionizer Compliance Verification (discharge time and offset voltage). Offset voltages of that exceed specification may indicate the need for replacement of emitters. Normal emitter life is 3 years, replacement emitters are easy to install and available from United SCP.