Toggle mobile menu
Free Shipping on Select Products!
ESD Floor Finish
ElectraGlaze features a proprietary, aqueous co-polymer blend of 22 active
ingredients (most other ESD finishes a mere 17). Our exclusive formulation provides dramatically superior
chemical, water and slip resistance with the best resistance to abrasions
and scuff marks in the industry. ElectraGlaze's permanent conductive
properties add minimal resistivity to ESD conductive flooring and tend to
actually improve the conductivity of static dissipative flooring. With
ElectraGlaze scuff marks are easy to remove (no more scouring your floor on
your hands and knees with Scotch Brite;). Note:
avoid application in high
humidity conditions, high humidity tends to make all ESD floor finishes
develop an oily feel.
Data and Specifications Sheet (pdf
Application: ESD floor finish is not applied like standard floor finish,
take the time to
understand the difference. If the flooring has been previously coated
with products other than those supplied by United SCP, is
dirty or dingy or has been coated by the flooring
manufacturer, strip the floor using
the directions for dilution and use and double rinse with
cool clean water prior to applying ElectraGlaze.
Always use clean containers and non linting finish mops
wax applicators to apply
ElectraGlaze. For string style mops soak the mop to remove any impurities and rinse
thoroughly. Wring out the mop as dry as possible and dip the mop into the
E-Glaze. Wring out the mop so that it does not drip and apply a thin
coat of E-Glaze to the entire floor. Don't allow the mop to become dried out
as streaks in the floor will result. Allow the floor to dry thoroughly. The
drying time will vary depending on temperature and humidity generally taking
between 2 to 4 hours. After the first thin coat has dried for at least 2
hours reapply a second coat. For ESD flooring 2 coats are ideal. High speed
polish for ultimate shine using
ElectraShine Spray Buff.
Maintenance: Dry dust mop frequently to remove abrasives
and dirt that can degrade the performance of the anti-static
properties. Remove scuff marks by spray buffing with a clean
ElectraShine Spray Buff.
Damp mop the floor only as needed
floor finishes (from United or any other Manufacturer) will
not reliably render standard flooring conductive enough to
meet the latest ANSI standards. To reliably provide this
level of conductivity
coat the standard flooring as is shown here.