|
ElectraGuard Static Control Floor Paint
The typical system uses 3 coats of ElectraGuard (1 coat a day for 3 days) followed by 2 thin coats of ElectraThane and 1 thin top coat of ElectraGlaze (these sealers can be applied in the same day). If needed, an intermediate barrier coat of ElectraBond may be applied (using a mop) between the first and second coat of ElectraGuard to hide imperfections from concrete repair. The average coverage of ElectraGuard is 350 square feet per gallon per coat. The typical coverage of the sealers are 1,500 square feet per gallon per coat. The sealers (ElectraThane & ElectraGlaze) add the gloss. The top coat of ElectraGlaze may be stripped and re-applied if needed (it's a sacrificial coating). The paint is applied with a roller, the sealers are applied with a wax applicator or finish mop.
|
|
|
ElectraGuard is a two part REAL Epoxy floor paint that controls the generation of static electricity. ElectraGuard outwears mere acrylic latex based products by 300%! Last twice as long as single part premixed static control "epoxy" yet cost up to 50% less! Millions of square feet installed Nation Wide! Sixteen Year track record! EASY compliance to the latest standards and an easy straight forward installation that doesn't require sand blasting prior to application! Compare our prices to the high overhead big boys. Save your ESD program a substantial amount of money while providing a better product from a reliable supplier with an outstanding track record! ElectraGuard - You'll never find a better ESD floor for the money!
WHY SELECT AN ESD EPOXY FLOOR PAINT? Today's reality dictates an increasingly daunting task. To meet the latest DOD or ANSI ESD static control standards and assure your successful manufacturing of static sensitive
product ESD flooring is a must! Although the economy is improving does it REALLY make since to pay $7.00 to 10.00 per installed square foot for ESD tiles, thick set ESD epooxy or an anti-static rubber flooring? Many think NOT! Like you, we understand the importance of your ESD flooring. It must be easy to maintain, capable of handling ALL types of traffic, look great and never EVER stop working!
WHY USE ELECTRAGUARD? ElectraGuard epoxy floor paint is much tougher than mere acrylic latex based or "one part epoxy" conductive floor paints. While a typical acrylic latex based ESD floor paint will last approximately one to two years ElectraGuard has a 10 year life expectancy! ElectraGuard has the ability to bond to existing concrete and many other types of hard surface flooring (including non compliant anti-static vinyl and even old asbestos laden tile). ElectraGuard is very popular in new construction, for leased facilities and for ALL clients expecting to get the most return for their flooring investment. Long and Short? You'll never find a better ESD floor for the money!
|
|
|
