This Bag of 20ct (large) Powder Free Industrial Disposable Gloves is used in our ElectraGuard Installation Took Kit.

This 22" Disposable Paint Tray is used in our ElectraGuard Installation Took Kit.

4" Line paint roller is used in our ElectraGuard Installation Took Kit.

This paint agitator is perfect for mixing 1 gallon containers and quart sized
samples of ElectraGuard. The total length is 16”. The diameter of the mixing
head is approximately 3 inches. The shank of this tool is designed to fit a
drill collet of 3/8” (.375) or larger.

Wooster 18" 3/8 nap roller is used in our ElectraGuard Installation Took Kit.

4" Line paint  2 pack roller replacement for use in our ElectraGuard Installation Took Kit.

This 3"x 60yd Roll of Blue Painters Tape is used in our ElectraGuard Installation Took Kit.

This paint agitator is perfect for mixing 5 gallon containers of ElectraGuard. The total length is 29”. The width of the head is approximately 9 inches. The shank of this tool is designed to fit a drill collet of 1/2” (.500) or larger.

This Wideboy Roller Frameis used in our ElectraGuard Installation Took Kit.

This Wooster Sherlock 4-8' Roller Handle is used in our ElectraGuard Installation Took Kit.

4" Floor scraper is used in our ElectraGuard Installation Took Kit. Handle length is availiable in 12" or 48".

The ElectraGuard Bond Strength Test kit is a convenient tool that allows the user to test the bond strength and other characteristics of our ElectraGuard ESD Epoxy in conjunction with any existing substrate. Recommended for use on a variety of substrates including concrete, epoxy, VCT, existing paints and other standard floor covering materials.