United Static Control Products, Inc

Today's reality dictates an increasingly daunting task. To meet the latest ANSI ESD static control standards and assure your successful manufacturing of static sensitive electronics esd flooring is a must! Yet in today's economy does it make since to pay $7.00 to 10.00 per installed square foot for esd tiles, thick set esd epoxy or an anti-static rubber floor? Most think NOT! ElectraSeal seals concrete with an effective static control formulation designed to meet today's latest requirement and eliminate dust production of the concrete slab for less than $.20 cents per square foot!

WHY A STATIC CONTROL CONCRETE SEALER?

EASY TO MAINTAIN!

ElectraSeal is an extremely durable Anti Static concrete sealer. After application and curing of ElectraSeal routine maintenance (to be expected with any floor) is all that is required to maintain the luster and conductivity of the finish. It's important to remove abrasives that can scratch and degrade the conductivity by dry mopping (usually on a daily basis). On an occasional basis (most of our clients prefer to do this once every week or two) damp mop the floor with a diluted mixture of ElectraClean and water and allow to dry. Note: Use only ElectraClean to damp mop your ElectraSeal floor,NEVER wash any esd floor with plain water. ElectraSeal does not readily lend itself to high speed polishing or burnishing. If a high speed polishing (produces ultimate shine) is desirable top coat the ElectraSeal with a single very thin coat of ElectraGlaze prior to polishing.