Home > All Samples >

ElectraBond Quart Sample
ElectraBond Quart Sample
ElectraBond Quart Sample
Our Price: $30.00

Availability: Usually Ships in 24 Hours

Description Technical Specs and Downloads

This quart sample of ElectraBond is used as an intermediate barrier coat between the first coat of cured ElectraGuard ESD Epoxy and the second coat of the epoxy. ElectraBond is used to extend the coverage of the more expensive epoxy and also hide imperfections in the concrete from repairs and variances in concrete texture. ElectraBond is applied with a wax applicator (a lambs wool pad) or a synthetic string mop (a mop that won't leave fibers in the coating). One thin coat, applied to the first coat of the cured ElectraGuard is typically all that is required. Allow the ElectraBond to dry for a minimum of 2 hours prior to applying the subsequent coats of ElectraGuard.

  • Extends the coverage of ElectraGuard Epoxy.
  • Hides imperfections from concrete repairs.
  • Easy to Apply (mop on in 1 thin even coat).
  • Use between the first coat of ElectraGuard and the second coat of ElectraGuard. Typical Coverage 1,200 to 1,500 square feet per gallon.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

All Samples
All Samples > Paints and Chemical Samples