Skip to content
Toggle mobile menu
United Static Control Products, Inc
Free Shipping on Select Products!
Static Control Equipment
RT-1000 and RT-500 Accessories
ESD Smocks & Garments
Custom Order Smocks
In Stock Smocks
ESD Bench Top Mats
Precut ESD Bench Mats
Bench Matting in Rolls
Ground Cords, Snaps, Mat Cleaners and Tools
ESD Floor Mats
Floor Mat Ground Cords
ESD Wrist & Heel Straps
ESD Safe Brushes
ESD Signs, Labels and Aisle Marking Tape
Constant Monitors for ESD Wrist Straps and Mats
AEI Constant Monitors for ESD Wrist Straps and Mats
Static Solutions Constant Monitors for ESD Wrist Straps and Mats
ESD Flooring & Floor Care
Static Control Floor Wax & Floor Care
ESD Floor Finish
Wax Application Tools
ESD Wax Stripper
Standard Floor Finish
ESD Floor Cleaner
ESD Spray Buff
Static Control Concrete Sealers
ElectraGuard Static Control Floor Paint
Concrete Etching Solutions
ElectraBond (for concrete repair)
ElectraGuard Sealers and Top Coats
Ground Foil, Bond Strength Kits, Accessories
ElectraGuard NON CONDUCTIVE Floor Paint
ElectraGuard Installation Tools
Static Solutions Urethane Enhanced ESD Floor Paint
ESD Carpet Tiles / ESD Vinyl Tile / ESD Sheet Vinyl Flooring
ESD Flooring Adhesive
Static Control For Offices
Anti Static Carpet Spray
Desk & Chair Mats
Static Control for Offices and Homes
ESD Floor Tiles, Sheet Goods and Epoxy Samples
Paints and Chemical Samples
Nav Menu 6
Nav Menu 7
Nav Menu 8
ESD Floor Mats
ElectraDyne Titanium Series® Modular ESD Floor Mat
Price is per square foot, please
your total square footage (Length X Width) add square footage amount to your cart, and then list your exact size (LXW) in the order comments section during checkout.
Usually Ships in 1 to 2 Weeks
Technical Specs and Downloads
ElectraDyne Titanium Series®
ESD Floor Mat for Static Control
ANSI / ESD S20.20 Compliant, 20 Year Warranty
Exceptional Static Conductance and Made in the USA!
ElectraDyne Titanium Series ESD floor mats are a long term solution for controlling electrostatics while meeting THE latest most stringent standards for static control Worldwide. They are recommended for use over thin pile (glued down) carpeting or ANY hard surface flooring material.
These mats are chair caster friendly, warranted for 20 years (details apply) and constructed from a 3mm thick dual layer vinyl with an abrasion resistance top surface and a full surface electrically conductive backing. ElectraDyne ESD Chair Mats feature the utmost in static conductance.
EDT-1 ESD chair mats may be manufactured to ANY rectangular or square size. They are made from a 3 mm thick interlocking modular tile that features a full surface static conductive backing covered with a topical wear surface that is nearly indestructible.
We manufacture the structure at our Colorado facility by laying out your design and trimming off the interlocking outside teeth. We pre-punch convenient ground points and supply the structure with a floor mat ground cord.
The structure is tested to the latest ANSI standards prior to us numbering the tiles, disassembling it and packaging it for shipping. EDT-1's are sold by the square foot and arrive at your location FLAT and ready to go to work.
These structures are ideal for use over ANY hard surface flooring and work well for covering office grade (thin pile) glue down carpeting. When used over carpet, the structures support chair caster and foot traffic and lighter weight rolling loads (e.g. ESD carts). When used over hard surface flooring they support ALL types of traffic including forklifts and pallet jacks.
Protect your ESD flooring investment - Perfect for covering ESD paint and virtually ANY type of ESD flooring (ground thru the backing - no ground cord required).
Cut Sheet & Specifications
Dry dust mop at end of shift to remove ALL abrasives, metal shavings, nut, bolts etc. Remove scuff marks using the abrasive edge of a Swiffer Wet Jet Jet pad or doodle bug and a dilute solution of
. Damp mop with a Swiffer wet jet as needed. No ESD floor finish is required, however these structures may be coated with 2 to 3 thin coats of
should a higher gloss and increased scuff mark removal be desired.
Reassembly and Installation:
These structures are built on demand at our facility located in Pueblo CO. Once completed, each tiles is numbered. A reassembly diagram is included on the ESD compliance paperwork provided with the structure. Allow the tiles to acclimate for 8 hours in the area where the structure will be reassembled. Lay the structure on the substrate using the numbered order we have provided. Using a dead blow mallet (or similar) tap the teeth together. Note: Be sure to keep the head of the mallet clean.
Attach ground cord fastener
(provided with your order) to any convenient (pre-drilled) corner. Snap
floor mat ground cord to fastener. Attach ring terminal cord termination to the center screw of an AC faceplate cover or attach it to ground using a method selected by your ESD program coordinator. Note: One ground cord is sufficient for structures up to 100 square feet. For areas over 100 square feet contact UnitedSCP for further directives.
Each structure has been fully tested and certified to ANSI ESD S20.20-2021, TR-53 Footwear / Flooring System Compliance Verification using in compliance test equipment prior to packaging and shipping to your location.
Titanium ESD Flooring has been fully tested and warranted as COMPLIANT to ANSI / ESD STM97.1 and ANSI/ESD STM97.2.
Flawless combination resistance properties
Easily pass ESD audits. Fully compliant to the latest standards
Only 3 mm for reduced tripping hazard
TWENTY year warranty of ESD properties
Fully Tested and Certified using in Compliance Test Instruments.
Made in the USA - ONLY from United SCP!
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
ESD Floor Mats