Home > ESD Carpet Tiles / ESD Vinyl Tile / ESD Sheet Vinyl Flooring >

Modular Peel & Stick Titanium ESD Tiles
Modular Peel & Stick Titanium ESD Tiles
Our Peel & Stick ESD Tiles provide ULTIMATE Installation Flexibility! Bonds to concrete (sealed or unsealed), old tiles, epoxy, paint, laminate flooring and even Thin Pile glue down carpeting!
  
Availability
Single Tiles: 1 ea 2' x 2' Tiles
Note: All ESD tiles must be shipped and stored FLAT to avoid damaging the tiles.
Our Price: $34.99

Availability: Usually Ships in 1 to 2 Weeks
Product Code: PEELSTICKTILES-SINGLES

Select a Color
Click to view another color

color*:

Qty:  
Description Technical Specs and Downloads Extended Information
 
INDUSTRY EXCLUSIVE! Patent Pending and Only from United SCP! Titanium Modular peel and stick tiles feature a case hardened static dissipative top surface bonded to a full surface static conductive backing laminated to a unique peel and stick adhesive! EASY installation over ALL types of hard surface flooring including, concrete (both sealed and unsealed), standard VCT tiles, Epoxy, Wood, Metal, Particle Board AND thin pile glued down carpeting.

No Messy Adhesives, Odors, Disruptions or Edging Headaches!

ULTIMATE Installation Flexibility!

Typical click and lock modular esd tiles are a hassle! Due to their thickness they present a significant tripping hazard and require hard to install ramped edges. They can't even go wall to wall without cutting off the interlocking tabs! Not so with Titanium Modular ESD Tiles! ElectraTile Modular Tiles are fast and EASY to install. For applications over insulative subfloors like carpet, concrete VCT, standard epoxy and painted flooring simply place the peel and stick 1/2" wide ground foil over the substrate, peel off the liner from the back of the esd tile and place the tile over the grid. For applications over conductive surfaces such as steel, ESD tiles and ESD carpet no grid is required!
Features
  • A mere 1/16" thick! Eliminates tripping hazards!
  • Tougher than nails and easy to keep clean.
  • Trim to fit any size area with NO loss of static conductivity!
  • Easy to use and FLAT right out of the box.
  • Bonds to sealed concrete VCT, epoxy and more!
  • Excellent for use on thin pile (glued down) Carpeting!
  • Excellent for use on ALL brands of ESD Carpeting!
  • Chairs roll Smoothly!
  • Releasable bond, tiles may be removed and replaced in seconds!
  • May be vacuumed with out loss of bond!
  • Odor free adhesive, dependable bond.
  • Electrical Conductivity: ElectraTile Peel and Sticks are not dependent on humidity for conductivity. They are static conductive and when properly grounded they easily provide reliable combination resistance values of <3.5E07 per ANSI 97.1 (for the primary grounding of technicians). These tiles easily meet ANSI ESD S20.20-2014, 97.2 with a charge generation well below 100 volts. They are popular for use in meeting DoD 4145.26-M with a typical resistance to ground of approximately 25 k ohms (2.5E04) to 1.0E05. Please Note: The resistivity may be modified upwards via a thin coat of ElectraSheen Sapphire II. For DOD use always pretest with your footwear prior to full scale application.
  • Note: All ESD tiles must be shipped and stored FLAT to avoid damaging the tiles.

You may ALSO be Interested in . . .
Copper Foil Ground Tape - 41', 82', 165' lengths
Our Price: $19.10

Add
Copper Foil Ground Tape For Grounding Peel & Stick ESD Tiles and More

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

ESD Carpet Tiles / ESD Vinyl Tile / ESD Sheet Vinyl Flooring