Home > ESD Floor Mats >

OctoStat® Mission-Critical ESD Protection Work Station Floor Mats
OctoStat® Mission-Critical ESD Protection Work Station Floor Mats- Compliant to latest ANSI Standards - The portable ESD Flooring Solution for your Workstation!
 
Alternative Views:

OctoStat Mission Critical ESD Floor Mats = The portable ESD floor for your workstation!
Full Certification to ANSI ESD S20.20 standards using NIST in compliance test instruments is available for a minor upcharge of $35.00 per mat.
Our Price: $238.62


Availability: Usually Ships in 1 to 2 Weeks
Product Code: OCTO-48


Options:

Color*:

Qty:  
Description Technical Specs and Downloads
 
For covering ANY hard surface flooring or concrete. Works GREAT over thin pile carpeting. A Perfect size for sophisticated offices, gaming AND advanced manufacturing. TWENTY YEAR warranty, unmatched static control properties. Includes easy to attach ground cord and complimentary AntiStatic spray for carpet (or for cleaning the mat). Patent Pending and Manufactured ONLY by United SCP.

OctoStat static control work station floor mats are a perfect size for sophisticated offices AND advanced ESD Sensitive manufacturing cells.

They are thin (for reduced tripping hazards) yet so durable they are warranted with a 20 year warranty on wear* and a lifetime warranty on their static control properties.
Manufactured in Colorado using our Titanium Series ESD Vinyl, OctoStat conductive chair mats reduce static (even with standard shoes and chair casters) and ELIMINATES static when used with ESD Chairs and Footwear.
Tested to ANSI ESD S20.20 and TR-53 prior to leaving our facility!

Octostat mats meet or exceed the static control requirements of ANSI ESD S20.20. They provide flawless combination resistance values that never EVER fail an ESD Audit. Two Layer! The material consist of a wear resistant top layer that is incredibly hard and permanently fused to a FULL SURFACE electrically conductive backing. This is the key to providing unmatched static control performance.

OctoStat mats are supplied as a kit with an easy attached floor mat ground cord kit. A corner is pre punched for your convenience making the attachment easy, convenient and secure. All it takes is a small screw driver and 5 minutes! The mats are shipped rolled and lay flat after a period of about 24 hours. To expedite this process place them in a warm sunny location prior to installation. Each kit is tested at our factory using NIST grade in compliance test instruments prior to shipping to your location.
Features

Dimensions:

48" as shown, 2 millimeters thick

OctoStat SIZE

DATA SHEET

ADVANCED SPECIFICATIONS

Surface Resistivity Point to Point per ESD S 7.1

<1.0E06

Electrical Resistance to Ground per ESD S 7.1

<1.0E06, (NOTE: Ground cord contains a 1 meg resistor taking the KIT up to about 2.3E06

Electrical Resistance per ANSI/ESD S20.20-2021, 97.1

<3.5E07

Tribo Charging Characteristics per ESD 97.2

< 10 Volts (<100 volts is passing)

Flooring Radiant Panel: NFPA 253: Critical Radiant Flux

0.73 W/cm2, Class 1

Flooring Radiant Panel: NBSIR 75-950: Critical Radiant Flux

Pass, Class 1

Flooring Radiant Panel: ASTM-648: Critical Radiant Flux

0.73 W/cm2, Class 1

Smoke Density, ASTM E-662; NFPA 258; Average optical density in burning / smoldering mode

<450

Residual Indentation LF-475A

0.002 average

Abrasive Wear, Tabor H-18 wheel, 5,000 cycles, 1,000 gm weight

1.1% loss of weight

Abrasive Wear, Tabor H-18 wheel, 1,000 gm weight to wear layer penetration (end point)

>20,000 cycles, <2.0% loss of weight

Static coefficient of friction, ASTM D-2047-03, James Test average wet, dry leather

.60 approx.

Static load limit DIN 16961.2

>1,000 PSI

Charge decay time per FTMS 4046-101c

< .17 seconds

OctoStat Series ESD Floor Mats meets or exceeds the requirements of Federal Specifications LF-475a and SST-312b for flexibility, dimensional stability, resistance to reagents and residual indentation.

OctoStat ESD Floor mats meets ANSI ESD S20.20-2021 Product Qualification and Compliance Verification

You may ALSO be Interested in . . .
ESD Aisle Marking Tape, 3" x 54 feet ElectraMat ESD Mat Cleaner
Our Price: $34.60

Add
Our Price: $9.99

Add
ESD FLOOR TAPE USED FOR MARKING STATIC CONTROL AREA A Clean ESD Mat is a Productive ESD Mat

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

ESD Floor Mats
Desk & Chair Mats