You are here: Home > Constant Monitors for ESD Wrist Straps and Mats
Constant Monitors for ESD Wrist Straps and Mats

The uncontrolled discharge of static electricity can wreak havoc on the small electronic components used in the manufacturing of electronics. To eliminate static from the technician and control this problem technicians and the mats they work on must connected to a reliable electrical ground. Our ESD wrist strap and mat monitors insure the connection of the technician and mat to ground and alarm if this grounding becomes compromised.

After all, the reliable performance of ESD matting and ESD wrist straps are critical for your product's integrity and problem free performance. Yet hand testing and logging wrist strap and ESD bench mat performance is a cumbersome, labor intensive, paperwork nightmare. Use of our ESD wrist strap and ESD bench mat monitors continuously verifies the effectiveness of your ESD protected workstation, simultaneously satisfies ISO logging requirements and insures outstanding product quality. Let's face it: Wrist straps can fail, ESD mat cords can become detached. How much compromised product could you build before you catch the problem? Our Monitors test for problems every second of the working day!
Sort By:
Page of 1
Power Supply for AEI Constant Monitors Power Supply for AEI Constant Monitors

This power supply is the OEM replacement for all AEI 110/120 volt constant monitors. It features a 3rd prong grounded termination that allows the monitors to test the resistance between the AC electrical ground and that of a mat (or person) in conjunction with the monitor. It will fit the following models of AEI constant monitors: ST-010, ST-020, ST-030, DT-020, DT-030, 9201D, 9202D and 929203D.

Our Price: $28.99
ST-010 Single Threshold (high resistance = alarm). Used to test the esd wrist strap of a single user ESD wrist strap monitor, single threshold, single user

Constant ESD wrist strap monitor continually checks all standard wrist straps for high resistance levels, broken cords or compromised skin to strap contact, Single threshold (high resistance levels = alarm). Designed to test the ESD wrist strap of one user.

Our Price: $60.94
Sale Price: $53.94
You save $7.00!
ESD constant monitor ST-020 test wrist strap AND ESD matting resistance of single user ESD Wrist Strap and Mat Constant Monitor, single threshold, single user

Constant ESD wrist strap monitor continually checks ESD matting and all standard wrist straps for high resistance levels, broken cords or compromised ground connections.

Our Price: $78.67
Sale Price: $71.67
You save $7.00!
ESD constant monitor DT-020 test wrist strapand ESD mat resistance of single user ESD Wrist strap and ESD mat monitor, DUAL threshold, single user

Constant ESD wrist strap and ESD mat monitor continually checks wrist straps and ESD mats for high AND low resistance levels. IE broken cords or compromised skin to strap contact OR the loss of a safety resistor used in the standard ground cords of wrist straps and mats, DUAL threshold (high AND low resistance = alarm).

Our Price: $83.37
ESD constant monitor ST-030 test TWO wrist strap AND single shared ESD matting resistance to ground ESD Mat and TWO Wrist Strap Constant Monitor, single threshold. For two technicians sharing one ESD mat

Constant ESD wrist strap monitor continually checks ESD matting and all standard wrist straps for high resistance levels, broken cords or compromised ground connections.

Our Price: $124.00
Sale Price: $117.00
You save $7.00!
   
 

ESD constant monitors, the good, the bad and the UGLY:


Now-a-days there are a variety of monitors to choose from. Many require expensive hard to find dual wire wrist straps, provide a pulsed verification a mere 10% of the time or are overseas knockoffs so cheaply made that FRAGILE should be in their part number! NOT SO with our monitors! These monitors provide 100% continuous verification, don't require special wrist straps and these American Made monitors are designed to exacting close tolerance specifications backed by the strongest warranty in the industry!

Our ST series single threshold monitors: Alarm at high resistance levels only and test the most typical failure modes such as compromised skin to wrist strap contact, worn strap material or broken ground cords and connections (high resistance levels = alarm).

Our DT Series dualthreshold monitors: Test the typical failure modes such as compromised skin to wrist strap contact, worn strap material or broken ground cords and connections (high resistance levels = alarm) AND test for lost minimum resistance (IE the failure of the resistor in the wrist strap or ground cords).

Loss of the wrist strap safety resistor can constitute a safety hazard for the operator (especially when working with high voltage power supplies and equipment). In addition, lost resistance can cause an immediate discharge of electrostatic potential (rather than controlled) potentially as damaging as not eliminating the charge in the first place.