ElectraClean Quart Sample

Home > All Samples >

Availability:
Single Gallon Container $40.19
Case Lot ( 4 Single Gallons) $151.72
5 Gallon Container $174.70

Our Price: $9.35

Availability: Usually Ships in 24 Hours
Product Code: E-CLEAN-QUART-SAMPLE

Qty:

Description

Technical Specs and Downloads

Extended Information

ElectraClean: A gentle yet effective cleaner specifically formulated for use on any type of ESD (static control) flooring or electrically conductive floor coating. ElectraClean works GREAT on ESD epoxy, vinyl, ESD waxes and paints. Regular cleaners and detergent compounds leave harmful insulative residues reducing the static-control properties of your highly specialized flooring, Not SO with ElectraClean! ElectraClean works great in both power scrub AND mop on applications, removing dirt and soil while maintaining or increasing the conductivity of your critical ESD flooring substrate. Super concentrated and now approved for use on ESD Carpet!

Application for Hard Surface Flooring: ESD Floor Surfaces should be swept or vacuumed prior to washing to remove loose dirt and soil. For use in daily or frequent damp mopping, use a dilute solution of 8-10 ounces of ElectraClean per gallon of warm water. Mop the floor lightly and allow it to dry. Do not rinse. For heavier soil conditions, sweep or vacuum the floor to remove loose soil or dirt. Dilute 12 - 16 ounces of cleaner per gallon of warm water and use as a mopping solution. After cleaning, the floor may be spray buffed with ElectraShine or recoated with ElectraGlaze.

Coverage for Hard Surface Flooring: 1,000 SF per gallon of diluted ElectraClean. Typical dilution at 8 ounces to a gallon of water = 16,000 SF per gallon of concentrate.

Application for ESD Carpet: Pretest for color fastness. Using a clean white cloth, rub diluted solutions on a hidden part of the carpet. If the carpet changes color or color transfers to the cloth. Do Not Use. After the color fastness test, thoroughly vacuum the ESD carpet to remove loose dirt and soil. Pre-treat heavy stains or soiled areas using the diluted ElectraClean. Work the solution into the area using a soft carpet brush. When completed, add 4 to 6 ounces of ElectraClean to a gallon of warm to hot water. Extraction clean following the directions provided by the manufacturer of the equipment. The typical coverage will vary depending on carpet pile height, construction and soil level. The typical coverage on office grade thin pile glued down carpeting is approximately 150 square feet per gallon of diluted product.

Note: Keep out of the reach of children. Follow the precautions as listed on the SDS sheet.

SDS SHEET (DOWNLOAD)

PRODUCT SPECIFICATIONS

SPECIAL PRECAUTIONS: Can cause eye and skin irritation. Wear safety glasses and plastic gloves when handling material. Prolonged contact with skin can cause dermatitis. If ingested, drink milk, egg whites, gelatin solution, or large volumes of water. Do not induce vomiting. In the event of eye or skin contact flush the effected area with plenty of water. Contact physician immediately. Contains Diethylene glycol methyl ether CAS# 111-777-3. For detailed information consult SDS sheet.

Features

High Power and Deep Cleaning
Now approved for use on ESD carpet
Won't leave insulative residues
Perfect for ALL TYPES of Anti Static floors
Pleasant very light odor
Environmentally sensitive
Economical. You control the strength
Mild anti-stats rejuvenate ESD floor finish
Works with all types of cleaning equipment

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

All Samples
All Samples > Paints and Chemical Samples

	ElectraGlaze Quart Sample $15.00
	ElectraStrip Quart Sample $8.00
	ElectraSolve Quart Sample $24.95
	168-AS UltraTough - Full Rolls Select Size to View Price
	167-AS UltraComfort Blue AntiStatic Table Top Matting - Economical Rolls Select Size to View Price