Anti Static floor finish spray buff for Static Control

Home > Static Control Floor Wax & Floor Care > ESD Spray Buff >

ElectraShine ESD Flooring Spray Buff

ElectraShine Anti Static Enhanced ESD Floor Buff

Alternative Views:

Availability:
Single Gallon Container
Case Lot ( 4 Single Gallons)
5 Gallon Container

Quantity Discounts applied at checkout when you purchase 3 or more case lots and 5-gallon containers!

Our Price: $34.99

Product Code: E-SHINE-1

		Click to view another ElectraShine Options
ElectraShine Options :

Qty:

Description

Technical Specs and Downloads

Extended Information

ElectraShine: Equals ULTIMATE shine, diamond like luster and an outstanding mirror like finish! No wonder E-Shine is the leader of the pack with floor care professionals seeking the utmost in gloss and floor finish durability.

ElectraShine eliminates nuisance static from standard floor finish and enhances the conductivity of all antistatic wax. Spray buffing with E-Shine helps eliminate scuff marks and it's easy to apply! E-Shine is ideal for use with either propane or electric high speed polishing equipment (1200 rpm or higher). Typically non diluted and either mopped on and buffed over or applied as a light spray in front of the polishing equipment.

Why spray buff and ESD floor finish? Spray buffing changes the profile as well as the hardness of the existing ESD floor finish and provides a brilliant diamond like luster as the alteration of the micro finish operation progresses. Not only is the wax made harder by the heat generated as a by product of the polishing / burnishing application. (equating to an approximate 20% increase in wear resistance) electrical conductivity is increased by as much as 1/2 of a decade in both point to point readings and resistance reading to ground. Although the heat generated during the polishing process can be beneficial it's important not to get carried away.

Overheating can pull excessive active ingredients from the finish compromising conductivity and leaving hard to remove oily smears. We recommend using new polishing pads or bonnets, starting with the finest pad available and working to a more aggressive pad should your needs dictate. Always keep the pad semi moist. The flooring should never feel warm to the touch in an area that has been polished. For best results allow the floor finish to cure for at least 24 hours prior to polishing. ElectraShine provides a superb increase in shine, conductivity and wear resistance and works well with both propane and electric high speed polishers to remove many common scuff marks as you polish.

Storage and Shelf Life: Store at an ambient temperature of 60 to 80 degrees Fahrenheit and in a tightly sealed container. Do NOT expose this container to direct sunlight or contaminate the container with product that has been previously poured into another container (such as a mop bucket) Do not mix with other chemicals. The shelf life of this product is one year from the date of purchase if these requirements have been followed.

ElectraShine is a concentrate. A gallon can provide up to 24,000 square feet of coverage.

Typical coverage: 1,500 SF of diluted product per gallon.
Typical dilution: 8 ounces of product mixed with about 1 gallon of clean cool water.

Features

Ultimate Shine! Diamond Like Gloss!
AntiStatic properties enhances static conductivity!
Easy to apply, fast and economical!
A flawless shine every time!
Helps remove many common scuff marks!
Reduces heat stress from high speed polishing!
Ideal for propane and electric polishers!
Made in the USA and environmentally oriented!

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Static Control Floor Wax & Floor Care > ESD Spray Buff

	ElectraShine Quart Sample $8.74
	ElectraWear Ultimate Cotton Poly Smock Color Fabric Sample Set $14.99
	Titanium Color Sample Set $14.99
	ElectraThane Specialty Sealer - 1 gallon container $68.78