ESD (antistatic) floor wax for controlling static electricity

Home > Static Control Floor Wax & Floor Care >

ElectraGlaze Anti Static Floor Finish - 5 Gallon Container

Photo/ESD Floor Wax in 5 Gallon Container

ElectraGlaze Anti Static Floor Finish in 5 Gallon Container. Perfect for use on all hard surface ESD flooring. THE recommended choice for sealing our ElectraGuard ESD Epoxy floor paint!

TRUE Low VOC ESD Floor Finish! THE Highest Quality at a GREAT Price! Easy application, powerful anti-static performance. For use on all hard surface ESD flooring materials including ESD Tiles and sheet Vinyls.

Our Price: $267.25

Availability: Usually Ships in 1 to 2 Business Days
Product Code: E-GLAZE 5

Qty:

Description

Technical Specs and Downloads

Extended Information

New! ElectraGlaze has now been Certified as meeting THE latest Indoor Clean Air Standards! Diamond Hard, Brilliant Shine, Permanent Scuff Resistance!

ElectraGlaze features a proprietary, aqueous co-polymer blend of 22 active ingredients (most other ESD finishes a mere 17). Our exclusive formulation provides dramatically superior chemical, water and slip resistance with the best resistance to abrasions and scuff marks in the industry. ElectraGlaze's permanent conductive properties add minimal resistivity to ESD conductive flooring and tend to actually improve the conductivity of static dissipative flooring. With ElectraGlaze scuff marks are easy to remove (no more scouring your floor on your hands and knees with Scotch Brite). Note: avoid application in high humidity conditions, high humidity tends to make all ESD floor finishes develop an oily feel.

Application: ESD floor finish is not applied like standard floor finish, take the time to understand the difference. If the flooring has been previously coated with products other than those supplied by United SCP, is dirty or dingy or has been coated by the flooring manufacturer, strip the floor using ElectraStrip. Follow the directions for dilution and use and double rinse with cool clean water prior to applying ElectraGlaze.

Always use clean containers and non linting finish mops or wax applicators to apply ElectraGlaze. For string style mops soak the mop to remove any impurities and rinse thoroughly. Wring out the mop as dry as possible and dip the mop into the E-Glaze. Wring out the mop so that it does not drip and apply a thin even coat of E-Glaze to the entire floor. Don't allow the mop to become dried out as streaks in the floor will result. Allow the floor to dry thoroughly. The drying time will vary depending on temperature and humidity generally taking between 2 to 4 hours. After the first thin coat has dried for at least 2 hours reapply a second coat. For ESD flooring 2 coats are ideal. High speed polish for ultimate shine using ElectraShine Spray Buff.

Maintenance: Dry dust mop frequently to remove abrasives and dirt that can degrade the performance of the anti-static properties. Remove scuff marks by spray buffing with a clean pad and ElectraShine Spray Buff. Damp mop the floor only as needed using ElectraClean.

Note: ESD floor finishes (from United or any other Manufacturer) will not reliably render standard flooring conductive enough to meet the latest ANSI standards. To reliably provide this level of conductivity coat the standard flooring as is shown here.

Storage and Shelf Life: Store at an ambient temperature of 60 to 80 degrees Fahrenheit and in a tightly sealed container. Do NOT expose this container to direct sunlight or contaminate the container with product that has been previously poured into another container (such as a mop bucket) Do not mix with other chemicals. The shelf life of this product is one year from the date of purchase if these requirements have been followed.

Features

Brilliant shine!
One year shelf life and easy application!
UL approved slip resistance!
Makes scuff marks EASY to remove!
Lowers Tribo Charging for less static!
Dramatically reduces maintenance!
Low odor, low LOW content, biodegradable and environmentally friendly. PERFECT for ESD floors and non conductive hard surface flooring!
ANSI/ESD S2020-2021, 2 coats on ESD conductive flooring: <3.5E07
Proudly Made in the U.S.A.

You may ALSO be Interested in . . .

Replacement Mop Head for Application System

High Speed Wax and Sealer Application Delivery System

Sale Price: $21.75

Add

Sale Price: $78.97

Add

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Static Control Floor Wax & Floor Care
Static Control Floor Wax & Floor Care > ESD Floor Finish
ElectraGuard Sealers and Top Coats

	168-AS UltraTough ESD Mats - Smaller Custom Cut Sizes Select Size to View Price
	Titanium Heat Welding Rod $105.30
	UltraStrong ESD Mat to Ground Cord Fasteners for use with snap setting tools $11.50
	40220HS-B Mission Critical ESD Chair Mat for Hard Surface Flooring and Thin Pile Carpet Select Size to View Price