Why an ESD Sheet Vinyl? Titanium Series esd flooring is available in sheet goods (or optional tiles) for a very good reason. Let's look at a 150' x 60' area. A typical 1' x 1' ESD tile will have over 18,000 linear feet (nearly 4 MILES of seams)!Unfortunately tiles don't always fit perfectly and the installer must adjust (leave small spaces between the tiles) as the installation progresses (some tiles even shrink over a period of time). And / or the substrate isn't flat leaving an uneven profile (slight highs and lows) to the finished install. Minute spaces between the tiles and / or deviations in the flatness, a perfect environment for contaminant and dirt entrapment. On a standard tile floor these deviations typically present little problem, they are often filled in with floor wax. ESD floor finish shouldn't be a necessity for a quality ESD floor. It raises the insulative properties, can wreak havoc in a clean room (from powdering), is expensive and can be a maintenance application nightmare! Titanium sheet goods, same area? less than 2,000 linear feet of seams and THESE seams are heat welded for the ultimate in cleanliness and ease of maintenance.

*NOTE: conductive adhesive MUST be used to provide tile to tile electrical conductivity