Toggle mobile menu
Free Shipping on Select Products!
Container Size: Spools, .167 (4.2 mm) thick X 328 Linear Feet in Length.
Heat welded Titanium provides ultimate dimensional stability, cleanliness and ease of maintenance. Titanium heat welded floors are perfect for locations that experience standing or reoccurring liquid spills (or if the flooring will be used as a short term barrier to stop water penetration from broken pipes from seeping through the concrete slab and damaging equipment on a lower level). As such, Titanium sheet vinyl is the ultimate material for use in multi floor server facilities. Titanium heat welded ESD floors are the preferred solution for clean rooms and are perfect for use in the manufacturing of sophisticated energetics, munitions, explosives, pharmaceuticals AND static sensitive microelectronics.
Process Overview: To heat weld Titanium a groove is cut where the seams meet. A specialty hot air gun and nozzle are used to heat the welding rod and flooring. The heat weld technician slowly draws the heat weld equipment down the length of the groove filling it with a bead of molten vinyl while melting the adjacent groove that has been placed in the flooring. The bead is allowed to cool (for about 15 minutes). A specialty knife or vinyl plane is used to rough cut the top of the bead cutting it down to about .010 from the top surface of the flooring. A second finish cut is completed (normally next day) allowing the bead to be cut to the same height as the flooring.This product is made SPECIFICALLY for Titanium and ELectraTile ESD flooring and it not recommended, sold or provided for other flooring material.